Architectural Building Components

Skip to content

200 SERIES METAL ROOF SYSTEM

STRUCTURAL STANDING SEAM ROOF PANELS

Overview
Specs & Dimensions
Install & Retrofit
Color Options
Downloads

The Leading Standing Seam Metal Roof

Designed to be installed over 5' open frame
Special clip allows for full 2 inches of thermal movement
Minimum Slope: 1/2:12

The 200 Series is by far the most popular standing seam metal roof system in use today because of its superior wind uplift and water infiltration resistance. It comes in 2 versions: the 200SL where the seam is folded 90 degrees in a single lock or the 200DL where the seam is folded 180 degrees into a double lock configuration

This metal roof panel was designed to be installed over an open frame and has undergone multitudes of tests for uplift at Underwriters Laboratories as well as uplift tests in accordance with ASTM E-1592, Corps of Engineers, Florida Building Code, International Building Code and Texas Windstorm.

Product Features

UL-580 Class 90 Uplift Rating
UL Class 4 Impact Resistance
ASTM 1592 Uplift Testing
ASTM Air and Water Infiltration testing
Florida Building Code Approval
Texas Windstorm Approval
Jobsite production capabilities for long panels
Oil can reducing striations or stiffening ribs available
Designed to be installed over 5' open frame
Special clip allows for full 2 inches of thermal movement
Minimum Slope: 1/2:12

200 Single Lock & 200 Double Lock

200SL where the seam is folded 90 degrees in a single lock

200DL where the seam is folded 180 degrees into a double lock configuration

This structural metal roof panel features a 2 inch tall vertical rib that is mechanically seamed after the roof is installed. The standing seam panel is held to the underlying structure with a 20 gauge sliding clip that allows for up to 2 inches of thermal expansion.

Standard Gauges and Finishes

22 gauge Prefinished Kynar 500^® PVDF Resin-Based and Galvalume Plus™
24 gauge Prefinished Kynar 500^® PVDF Resin-Based and Galvalume Plus™
0.7 mm DuraZinc^®

Standard Widths

22 and 24 gauge: 16", 18"

Retrofit Roof Installation Over an Existing Sheet Metal Roof

Learn more about how to retrofit your existing metal roof with the the 200 series.

The Archzilla^® Advantage

What separates ABC from our competitors with our standing seam systems is that we have revolutionized on-the-roof production. We built our Archzilla^® jobsite production trucks so we could produce a factory panel right onto the roof using factory personnel and equipment. By eliminating leaky end laps, we eliminate one of the biggest sources of problems in a standing seam metal roof panel.

.

* There is an upcharge for these colors.

** Due to variances in monitors, the above chart may not be an exact representation of Architectural Building Components’ colors. For accurate colors, please request a hard copy from Architectural Building Components.

The colors represented here are standard Kynar 500^® PVDF Resin-Based or Hylar^® 5000 based colors offered by Architectural Building Components. Custom colors, metallic and mica based finishes are also available. Custom color matches have an up charge. Please contact ABC for price and delivery information. Metal panel samples available for final color approval. Most colors shown are within limits of color chip reproduction.

PRODUCT DESCRIPTION

Fluropon^® coatings are factory applied, oven-baked finishes based on polyvinylidene fluoride resin (Kynar 500^® PVDF Resin-Based or Hylar^® 5000). Fluropon^® coatings are manufactured by Valspar, 701 S. Shiloh Rd., Garland, TX 75042-7812.

Fluropon^® coating systems consist of primer, applied at a nominal dry film thickness of .25 mil, and a color coat, applied at a nominal dry film thickness of .75 mil. Some custom colors may require additional coats, such as a clear top coat and/or a barrier coat. Some aggressive environments may require additional coats, such as a clear top coat and/or a thick film primer. Contact Architectural Building Components for suggested specifications.

PERFORMANCE

Fluropon^® coatings on steel meet or exceed U.S. Army Corps of Engineers Section 07413 Metal Roofing & Siding requirements. Test results reported here are for G90 HDG. Detailed test results are available upon request.

Color	Initial Solar Reflectance	Emissivity Value	Solar Reflective Index (SRI)
Seal Brown	0.29	0.86	29
Colonial Red	0.30	0.86	30
Hemlock Green	0.35	0.85	36
Evergreen	0.16	0.86	12
Dark Bronze	0.28	0.90	29
Brite Red	0.46	0.85	51
Patina Green	0.37	0.85	39
Felt Green	0.10	0.84	3
Surry Beige	0.41	0.86	45
Brite White	0.78	0.83	96
Teal	0.29	0.86	29
Slate Blue	0.30	0.86	30
Sandstone	0.54	0.86	63
Terra Cotta	0.35	0.87	37
Slate Gray	0.40	0.86	43
Regal Blue	0.13	0.86	8
Regal White	0.70	0.85	80
Buckskin	0.38	0.85	40
Granite	0.37	0.88	40
Matte Black	0.07	0.86	0
Copper Metallic	0.49	0.84	55
Silver Metallic	0.58	0.78	66
Weathered Galvalume	0.30	0.82	29
Champagne Metallic	0.38	0.80	38

Kynar 500 is a registered trademark of Arkema, Inc.

200 Series Product Specifications

The 200 Series is by far the most popular metal roofing system in use today because of its superior wind uplift and water infiltration resistance. It comes in 2 versions: the 200SL where the seam is folded 90 degrees in a single lock or the 200DL where the seam is folded 180 degrees into a double lock configuration.