• Project Name:Noric Arena at Oklahoma State Fairgrounds.
• Product:18” x 24 ga. 238T, Tapered
• Color: Evergreen.

The 238T, a 2-3/8" tall structural standing seam panel, combines the attributes of snap-lock & mechanically seamed into one unique panel. The 238T has a seam in the form of a “T” and is a two-piece mechanically seamed structural standing seam roof panel. Find out why Architectural Building Components and the 238T are the perfect option for your low slope roofing needs.

Benefits of the 238T include:

• Factory Mutual listed (new construction and retro-fit)
• Individual panel replace-ability after installation is complete
• Unlimited thermal movement
• Amazing wind uplift capabilities
• Incredible static water performance
• Symmetrical panel design for reduced waste

Download Our Product Brochure

238T Features

• Perfect for low slopes, open frame, and retrofit
• Bi-Directional panel installation (excludes metallic color selections)
• Pre-install clips
• Center starting point possible
• Superior water tightness
• Jobsite Production capabilities for long panels to avoid troublesome end laps
• Oil-can-reducing striations or stiffener ribs available
• Minimum slope ¼:12
• Curving Capable

In addition to standard panels, Architectural Building Components can taper the 238T. With a minimum slope requirement of 1/4:12, this panel is ideal for almost any design.

Profile Options:

Retrofit Roof Installation Over an Existing Metal Roof

238T Series panels have no end laps because they are manufactured right onto the roof in lengths up to 250 feet using one of our Archzilla^® jobsite production monster trucks.

Call one of our knowledgeable area metal roof specialist for an evaluation of your facility’s metal roof and ask if a retro-fit solution would work in your situation.

* There is an upcharge for these colors.

** Due to variances in monitors, the above chart may not be an exact representation of Architectural Building Components’ colors. For accurate colors, please request a hard copy from Architectural Building Components.

The colors represented here are standard Kynar 500^® PVDF Resin-Based or Hylar^® 5000 based colors offered by Architectural Building Components.Custom colors, metallic and mica based finishes are also available. Custom color matches have an up charge. Please contact ABC for price and delivery information. Metal panel samples available for final color approval. Most colors shown are within limits of color chip reproduction.

PRODUCT DESCRIPTION

Fluropon^® coatings are factory applied, oven-baked finishes based on polyvinylidene fluoride resin (Kynar 500^® PVDF Resin-Based or Hylar^® 5000). Fluropon^® coatings are manufactured by Valspar, 701 S. Shiloh Rd., Garland, TX 75042-7812.

Fluropon^® coating systems consist of primer, applied at a nominal dry film thickness of .25 mil, and a color coat, applied at a nominal dry film thickness of .75 mil. Some custom colors may require additional coats, such as a clear top coat and/or a barrier coat. Some aggressive environments may require additional coats, such as a clear top coat and/or a thick film primer. Contact Architectural Building Components for suggested specifications.

PERFORMANCE

Fluropon^® coatings on steel meet or exceed U.S. Army Corps of Engineers Section 07413 Metal Roofing & Siding requirements. Test results reported here are for G90 HDG. Detailed test results are available upon request.

• Kynar 500 is a registered trademark of Arkema, Inc.