JSM 200 Metal Roof System2" Structural Standing Seam Panels

The JSM 200 performs well in both architectural and structural applications with slopes as low as 1/2:12 and curved to a radius as tight as 20'. It is available in both single-locked (JSM 200 SL), where the seam is folded 90 degrees, and in double-locked (JSM 200 DL), where the seam is folded 180 degrees.

This structural metal roof panel features a 2 inch tall vertical rib that is mechanically seamed after the roof is installed. The standing seam panel is held to the underlying structure with a 20 gauge sliding clip that allows for up to 2 inches of thermal expansion.

This metal roof panel was designed to be installed over an open frame and has undergone multitudes of tests for uplift at Underwriters Laboratories as well as uplift tests in accordance with ASTM E-1592, Corps of Engineers, Florida Building Code, International Building Code and Texas Windstorm.

Benefits of the JSM 200 Include:

• UL-580 Class 90 Uplift Rating
• UL Class 4 Impact Resistance
• ASTM 1592 Uplift Testing
• ASTM Air and Water Infiltration testing
• Florida Building Code Approval
• Texas Windstorm Approval
• Job-site production capabilities for long panels
• Oil can reducing striations or stiffening ribs available
• Designed to be installed over 5' open frame
• Special clip allows for full 2 inches of thermal movement
• Minimum Slope: 1/2:12
• Can be colored to resemble a standing seam copper roof
• Available with deck offset of up to 1” for ventilation

• Designed to be installed over 5' open frame
• Special clip allows for full 2 inches of thermal movement
• Minimum Slope: 1/2:12