PBM

The PBM panel is nearly as popular as the PBR panel. It has a slightly different look, with ¾” tall ribs at 6” o.c. and covers 36” with every panel installed. The PBM panel is used more on metal wall applications, but can be used as a metal roof. The PBM panel has an extra purlin bearing leg feature that makes it easier to install the lap fasteners.

When used as metal roofing, the PBM panel is commonly installed on roof slopes as low as 1:12. In addition, it can be installed as a metal roof over both purlins and decked applications. This panel can be installed vertically or horizontally as a wall panel. It is used for fascias, parapets, and walls. Architectural Building Components has manufactured this part in up to 50’ lengths. This metal panel is available in 24 or 26 GA steel with either a Galvalume Plus or Kynar^® 500 finish.

PBM CSI Guide Specifications

Specs

PBM Product Data Sheet

Product Data Sheets

UL Information

Underwriters Laboratories Fire Ratings

LEED Information

Data Sheet - DuraZinc.pdfData Sheet - ABC Steel

* There is an upcharge for these colors.

** Due to variances in monitors, the above chart may not be an exact representation of Architectural Building Components’ colors. For accurate colors, please request a hard copy from Architectural Building Components.

The colors represented here are standard Kynar 500^® PVDF Resin-Based or Hylar^® 5000 based colors offered by Architectural Building Components. Custom colors, metallic and mica based finishes are also available. Custom color matches have an up charge. Please contact ABC for price and delivery information. Metal panel samples available for final color approval. Most colors shown are within limits of color chip reproduction.

PRODUCT DESCRIPTION

Fluropon^® coatings are factory applied, oven-baked finishes based on polyvinylidene fluoride resin (Kynar 500^® PVDF Resin-Based or Hylar^® 5000). Fluropon^® coatings are manufactured by Valspar, 701 S. Shiloh Rd., Garland, TX 75042-7812.

Fluropon^® coating systems consist of primer, applied at a nominal dry film thickness of .25 mil, and a color coat, applied at a nominal dry film thickness of .75 mil. Some custom colors may require additional coats, such as a clear top coat and/or a barrier coat. Some aggressive environments may require additional coats, such as a clear top coat and/or a thick film primer. Contact Architectural Building Components for suggested specifications.

Fluropon^® coating systems consist of primer, applied at a nominal dry film thickness of .25 mil, and a color coat, applied at a nominal dry film thickness of .75 mil. Some custom colors may require additional coats, such as a clear top coat and/or a barrier coat. Some aggressive environments may require additional coats, such as a clear top coat and/or a thick film primer. Contact Architectural Building Components for suggested specifications.

PERFORMANCE

Fluropon^® coatings on steel meet or exceed U.S. Army Corps of Engineers Section 07413 Metal Roofing & Siding requirements. Test results reported here are for G90 HDG. Detailed test results are available upon request.

Color	Initial Solar Reflectance	Emissivity Value	Solar Reflective Index (SRI)
Seal Brown	0.29	0.86	29
Colonial Red	0.30	0.86	30
Hemlock Green	0.35	0.85	36
Evergreen	0.16	0.86	12
Dark Bronze	0.28	0.90	29
Brite Red	0.46	0.85	51
Patina Green	0.37	0.85	39
Felt Green	0.10	0.84	3
Surry Beige	0.41	0.86	45
Brite White	0.78	0.83	96
Teal	0.29	0.86	29
Slate Blue	0.30	0.86	30
Sandstone	0.54	0.86	63
Terra Cotta	0.35	0.87	37
Slate Gray	0.40	0.86	43
Regal Blue	0.13	0.86	8
Regal White	0.70	0.85	80
Buckskin	0.38	0.85	40
Granite	0.37	0.88	40
Matte Black	0.07	0.86	0
Copper Metallic	0.49	0.84	55
Silver Metallic	0.58	0.78	66
Weathered Galvalume	0.30	0.82	29
Champagne Metallic	0.38	0.80	38

• Kynar 500 is a registered trademark of Arkema, Inc.