PBM METAL ROOF AND WALL PANEL

EXPOSED FASTENER METAL ROOF AND WALL PANEL

Product Description

The PBM panel is nearly as popular as the PBR panel. It has a slightly different look, with ¾” tall ribs at 6” o.c. and covers 36” with every panel installed. The PBM panel is used more on metal wall applications, but can be used as a metal roof. The PBM panel has an extra purlin bearing leg feature that makes it easier to install the lap fasteners.

When used as metal roofing, the PBM panel is commonly installed on roof slopes as low as 1:12. In addition, it can be installed as a metal roof over both purlins and decked applications. This panel can be installed vertically or horizontally as a wall panel. It is used for fascias, parapets, and walls. Architectural Building Components has manufactured this part in up to 50’ lengths. This metal panel is available in 24 or 26 GA steel with either a Galvalume Plus or Kynar 500 finish.

Gallery

PBM Metal Wall Panel

Product Variations

PBM

Standard Gauges and Finishes

22 gauge prefinished Prefinished Kynar 500® PVDF Resin-Based and Galvalume Plus™
24 gauge prefinished Prefinished Kynar 500® PVDF Resin-Based and Galvalume Plus™
26 gauge prefinished Ceramstar 950 and Galvalume Plus™

Standard Widths

Panel width 38.1/2"
Coverage 36”

Special Roof Notes:

Kynar 500 is a registered trademark of Arkema, Inc.
Hylar 5000 is the registered trademark of Ausimont USA,Inc.
Galvalume is the registered trademark of BIEC International.

Architectural Building Components - The Metal Roofing Specialist
Copyright 1988 - 2008 | No Laps. No Leaks. No Limits