The Problem
About 99.9% of the sheet metal contractors own and operate 10’ brakes. As a result, the project gets 10’ trim pieces. Trim pieces that channel water off the metal roof system, such as valleys, collect and drain water from numerous standing seam panels. Laps in valleys are even more vulnerable than laps in metal roof panels. Leaks can be prevented with proper design, specification, and application.
SEGMENTED 10’ PIECES |
CONTINUOUS 27’ PIECE |
The Solution
Architectural Building Components can manufacture a wide variety of sheet metal trim and flashings in lengths up to 32’ 6”. Without laps, you can expect improved appearance and performance on your sheet metal roof. We can accommodate galvanized or Galvalume steel up to 16 gauge thick. Furthermore, we can manufacture trim and flashings from copper, stainless, zinc, and aluminum. Although we provide all of our sheet metal trim components in long pieces, valleys, transitions, copings, edge trims, gutters, and downspouts offer the greatest benefits when made in the longest possible segments.
In addition, we provide several radius trim components in 10’ lengths. In many instances, curved walls and roof slopes will limit trim lengths to 3’ or less. Specify Architectural Building Components to provide improved performance our next metal roof system.
Sheet Metal Trim Gallery
3 piece Radius Coping (10’ pieces) |
Curved Fascia Trim (10’ pieces) |
| |
|
Perforated Soffit Trim (10’ pieces) |
Fascia Trim (30’ pieces) |
| |
|
|
